Conor Joseph Morgan, 45, had been delivering materials to Shott Farm in High Blantrye, a construction site being operated by Avant Homes (Scotland) Limited, when the incident happened on 19th April 2017. Conor, who was employed as a HGV driver for Regen Waste Limited, was crushed as the concrete blocks were being unloaded from the articulated flatbed trailer using an excavator with pallet fork attachment. However, the length of the pallet forks fitted to the excavator exceeded the width of the pallet being unloaded. As the pallet was being lifted the forks caught a second pallet of concrete blocks causing them to topple from the edge of the trailer and onto Mr Morgan.
The HSE investigated and found that Avant Homes (Scotland) Limited as the principal contractor on site should have ensured there was a safe system of work for the unloading of the delivery vehicle driven by Mr Morgan. It also found Regen Waste Ltd had not carried out a suitable and sufficient assessment of risk for the drivers delivering to remote sites not under its control.
Avant Homes (Scotland) Limited of Edinburgh Park, Edinburgh pleaded guilty to a breach of Section 3(1) of the Health and Safety at Work etc. Act 1974 and were fined £333,000.
Regen Waste Limited of Newry, County Down pleaded guilty to breaching Regulation 3(1)a of the Management of Health and Safety at Work Regulations 1999 and were fined £23,000.
Speaking after the case HSE principal inspector Graeme McMinn said, “This was a tragic and wholly avoidable incident, caused by a failure of the principal contractor to implement a safe system of work. The employer also failed to carry out a suitable and sufficient assessment of risk. Companies should be aware that HSE will not hesitate to take appropriate enforcement action against those that fall below the required standards.”
Assurity Consulting are leading experts in workplace health, safety and environmental compliance. For more information on our services, and how we can help you, please contact us on tel. +44 (0)1403 269375 or email us.